Contact Us at 800.782.5722
Pryer Technology Group
2230 N. Sheridan
Tulsa, OK 74115
918.740.0111
info@pryertechgroup.com
Triform Hydroform Press: Model 24-10-10SC
Press Information
Capabilities
| Maximum Chamber Pressure | 10,000 psi (69 MPa) |
| Maximum Blank Diameter | 24" (609 mm) |
| Lower Punch Force | 630 Tons |
| Lower Punch Stroke | 10" (254 mm) |
| Draw Depth Capacity | 10" (254 mm) |
| Maximum Punch Tool Diameter | 17" (432 mm) |
| Daylight (Fully Open Chamber) | 19.25" (489 mm) |
System Dimensions
| Overall System Length | 160" (406 cm) |
| Overall System Width | 94" (239 cm) |
| Overall System Height | 98" (249 cm) |
| Floor Space Required | 118" x 220" (300 x 559 cm) |
| Total System Weight | 45,000 lbs. (20,412 kg) |
Control System
| CNC/PLC | Allen Bradley |
| Electrical By | Allen Bradley |
| Touchscreen Interface | AB PanelView (Color) |
| Job Storage/Recall | 500+ Job Capacity |
Power System
| Main Motor Horsepower | 100 HP |
| Pump Manufacturer | Oil Gear |
| Working Fluid | ISO 46 W |
| Heat Exchanger | Included |
| Temperature/Level Sight Gauge | Included |
| Main Power | 480V |
| Phase | 3 Phase |
| Hz | 60 Hz |
| Control System Voltage | 110V |
| FLA Draw | 120 Amps |
| Alternative Power | Available |
Performance
| Forming Pressure Control | (+/-) 1% |
| Forming Position Control | (+/-) 0.002" (0.05 mm) |
Click for larger views
CNC Controls
The hydroform press is fully programmable
- Blow Down Mode
- Punch Mode
The full featured control offers job storage and recipe handling with expansion capabilities. In addition to sequential programming of pressure and position, the operator interface data/program screens include:
- System Diagnostics
- Alarm Handling and Logging
- Multi-level pass word protection
- OEM set-up screen for remote system performance adjustments
- PLC Input/Output visualization
- Cycle Timer
Optional remote VPN connection via Ethernet allows for the press system to be monitored by the factory for immediate technical support.